كلية الهندسة

المزيد ...

حول كلية الهندسة

أنشئت كلية الهندسة جامعة طرابلس سنة 1961م باسم كلية الدراسات الفنية العليا وذلك ضمن برنامج التعاون العلمي والتقني مع منظمة الأمم المتحدة للتربية والعلوم والثقافة اليونسكو، وكانت بذلك أول كلية هندسية بليبيا، وفي سنة 1967م، انضمت إلى الجامعة الليبية آنذاك تحت اسم كلية الهندسة، وفي سنة 1972م تم تأسيس كلية هندسة النفط التي كونت مع كلية الهندسة وكلية العلوم جامعة طرابلس سنة 1973م، وقد أضيفت سنة 1978م كلية الهندسة النووية والإلكترونية، وفي سنة 1985م تم دمج كلية هندسة النفط مع كلية الهندسة في إطار ربط الكليات والمعاهد العليا بالمراكز البحثية الهندسية، وقد تم دمج الهندسة النووية والإلكترونية مع كلية الهندسة سنة 1988م.

وبقدر ما تمتاز به كلية الهندسة من دور ريادي خلال مسيرتها العلمية هذه فأن دورها يزداد أهمية وذلك تمشياً مع التطور التقني وخاصة في مجالات هندسة الاتصالات والمعلوماتية والمواد الجديدة وتطبيقاتها والطاقة الدائمة والمتجددة والأساليب الحديثة في الإنشاء والعمارة ومالها من تأثيرات بيئية، واستجابة لهذا التطور فأن كلية الهندسة عمدت إلى تغيرات في مناهجها  التعليمية والهيكلية الأكاديمية بأن تطورت من كلية بأربعة أقسام منذ نشأتها حتى أصبحت تجمع عدد ثلاثة عشر قسماً وذلك تلبية لرغبات ومتطلبات المجتمع الليبي ومحققة لأهدافه وتطلعاته في التقدم، وتوافقاً لذلك فأن نظام الدراسة في الكلية تطور من نظام السنة الدراسية إلى نظام الفصل بمقررات فصلية.

إن التوسع في المجالات الأكاديمية بالكلية يحتاج ولا شك توسعات في المنشآت التي تستوعب الأعداد المتزايدة للطلاب التي وصلت إلى اثني عشر ألفا في السنوات الأخيرة. وهذا التوسع سيشمل إن شاء الله تعالى القاعات والمعامل وغيرها من الإمكانيات والتجهيزات المتطورة من أجهزة حاسوب وأجهزة قياس بحثية.

تتكون الكلية من أقسام: (قسم الهندسة المدنية- قسم الهندسة الميكانيكية والصناعية- قسم الهندسة الكهربائية والإلكترونية- قسم هندسة الحاسب- قسم هندسة العمارة والتخطيط ٌ العمراني- قسم هندسة النفط- قسم الهندسة الكيميائية- قسم الهندسة الجيولوجية- قسم هندسة التعدين- قسم هندسة الطيران- قسم الهندسة البحرية وعمارة السفن- قسم الهندسة النوويةٌ- قسم هندسة المواد والمعادن- قسم الإدارة الهندسية "دراسات عليا فقط").

وتمارس هذه الأقسام مهامها العلمية التخصصية وفق القوانين واللوائح والقرارات ذات العلاقة والتي تشمل في مجملها:

  • الإشراف الأكاديمي على الطلاب المتمثل في التسجيل والتدريس والتقييم.
  • متابعة برامج البحوث والتأليف والترجمة.
  • القيام بإعداد وعقد المؤتمرات والندوات العلمية المتخصصة.
  • إعداد ومراجعة المناهج الدراسية لمواكبة التقدم العلمي واحتياجات المجتمع.
  • تقديم المشورة العلمية التخصصية للمؤسسات الإنتاجية والخدمية بالمجتمع.
  • القيام بالدراسات العلمية والعملية في مجال البحث لحل مشاكل المجتمع ذات العلاقة.
  • المساهمة في وضع الخطط والمقترحات لتسيير العملية التعليمية بالكلية والأقسام.

حقائق حول كلية الهندسة

نفتخر بما نقدمه للمجتمع والعالم

278

المنشورات العلمية

326

هيئة التدريس

9723

الطلبة

558

الخريجون

البرامج الدراسية

بكالوريوس في هندسة التحكم و الأتمتة
تخصص هندسة التحكم و الأتمتة

...

التفاصيل
بكالوريوس
تخصص هندسة التعدين

...

التفاصيل
ماجستير هندسة حاسوب
تخصص هندسة الحاسوب

...

التفاصيل

من يعمل بـكلية الهندسة

يوجد بـكلية الهندسة أكثر من 326 عضو هيئة تدريس

staff photo

د. مواهب محمد الزروق الدردار

د.مواهب محمد الزروق الدردار هي احد اعضاء هيئة التدريس بقسم الهندسة الكيميائية بكلية الهندسة. تعمل الدكتورة مواهب الدردار بجامعة طرابلس كـاستاذ مشارك منذ 15-01-2020 ولها العديد من المنشورات العلمية في مجال تخصصها ، رئيس قسم الهندسة الكيميائية منذ فبراير 2022م

منشورات مختارة

بعض المنشورات التي تم نشرها في كلية الهندسة

Image compression using adaptive multiresolution image decomposition algorithm

With the growth of modern digital technologies, demand for transmission multimedia and digital images, which require more storage space and transmission bandwidth, has been increased rapidly. Hence, developing new image compression techniques for reducing data size without degrading the quality of the image, has gained a lot of interest recently. In this study, an adaptive multiresolution image decomposition (AMID) algorithm is proposed and its application for image compression is explored. The developed algorithm is capable of decomposing an image along the vertical, horizontal, and diagonal directions using the pyramidal multiresolution scheme. Compared to the wavelet transform, the AMID can be used for decimation with the guarantees of perfect signal reconstruction. Furthermore, the application of the AMID for image compression is explored and its performance is compared with the state-of-the-art image compression techniques. The performance of compression method is evaluated using peak signal-to-noise ratio and compression ratio. Experimental results have shown promising performance compared with the results of using other image compression approaches
Osama A. Alkishriwo(9-2020)
Publisher's website

Studying of Naturally Occurring Radioactive Materials (NORM) in Oilfield (A/100) South East of Libya

The huge volume of Naturally Occurring Radioactive Materials (NORM) wastes produced annually by the oil and gas industry in Libya deserves the attention of the national environmental protection authority, radioactive waste management and regulatory bodies. An investigation was carried out to find out the concentration of (NORMs) in evaporation ponds sludge in south eastern oilfield (A/100) of Libya. Twenty soil samples were collected from five evaporation ponds sludge. Activity concentrations of 226Ra, 232Th and 40K in soil generated during oil production operations were determined using a gamma spectroscopy system based on High Purity Germanium (HPGe) detector. Concentrations ranged from 83 to 1000 Bq kg–1 for 226Ra, 59 to 315 Bq kg–1 for 232Th and 109 to 304 Bq kg–1 for 40K. To evaluate the radiological effects, radium equivalent activity and external hazard are calculated. The magnitude of these results demonstrates the need of screening oil residues for their radionuclide content in order to decide about possibility of minimize the environmental impact of NORM and their final disposal. Disposal of NORM waste has to be in accordance with national regulations, environmental policy and international agreements and conventions. The researchers recommend limits for clearance and disposal, based on best international practice. arabic 18 English 82
Usama Elghawi (1-2021)
Publisher's website

استخدام تقنيات المواصلات في تحسين التشغيل لمنظومة النقل البري في مدينة طرابلس

Abstract Fire is one of the greatest risks for every building and particularly for high-rise buildings. Usually, a building fire causes not only hazard to the occupants in a floor, but also a possible threat to the occupants in other floors and in particular to those located at upper storeys, with rising temperature and with killer smoke. Fire simulation can be performed using software packages designed for such a task. The fire simulation can often include aspects of hazard identification, fire growth and smoke movement, egress assessment, structural fire performance, sprinkler and fire detection system design, and smoke management system specification.The present thesis examines the up-to-date technologies available within the context of fire engineering simulation. This work gives an overview of available software packages that are used today in fire engineering simulation. It presents the procedure of fire simulation inside a high-rise building by using an advanced computer program named the Consolidated Model of Fire Growth and Smoke Transport ) CFAST for short. The CFAST program simulates fire action by calculating fire gases, the evolving distribution of smoke and temperature throughout a building during fire. This computer program is based on solving a set of equations that predict the state variables such as pressure and temperature. These equations are derived from the conservation equations for energy mass and the ideal gas law. It is important to know that the resulting errors, which might result, does not come from these equations, but rather they come from numerical analysis representation of the equations or from the simplifying assumption.
خالد عبد الونيس السكوري (2010)
Publisher's website

المجلات العلمية

بعض المجلات العلمية التي تصدر عن كلية الهندسة