Abstract Recently more than 150 million tonnes of plastics were produced in the world. On the one hand, the consumption and production of polymers are increasing, on the other hand as landfill and incineration become more expensive and less accepted .The increasing amount of polymer wastes from them generates further mainly environmental problems. The recycling of plastic wastes is gaining increasing importance. Pyrolysis is one promising method for the treatment of mixed and contaminated plastic wastes. In this way the plastic wastes are converted into fuels or other valuable feedstock for the petrochemical industry. In present work catalytic cracking of waste plastics blend with HGO [Libyan gas oil supplied by the Zawia Oil Refinery Company boils in the range of 275-375Cº] was investigated using H-ZSM5and H-BETA. Reaction systems that were studied included high density polyethylene HDPE and polypropylene blend with HGO, reactions were carried out in one litre micro autoclave reactor under different conditions of weight, temperature and type of catalyst, The optimum conditions were 2.5% catalyst by weight of total feed stock, one hour, atmospheric presser and three temperatures selected 400Cº, 425Cº and 450Cº. The product distribution for the system [plastics and HGO] provided some good results high yield of liquid [gasoline] up to 210Cº, gases and small amount of heavy oils. Some analysis was used to qualify and quantify the product. The results from GC.MS analysis showed that the yield of gasoline (c5-c12) over H-ZSM5 higher than H-BETA. In case of 5%PP, 15%HDPE and 80%HGO over H-ZSM5 at 450Cº, 96% total conversion achieved. The result from TGA in the same case is 15% by weight. Also the theoretical calculations to quantify the produced gases after burring of waste plastic in rotary kiln reactor have been evaluated. it is found that the suitable ratio of CO:H2 to produce methanol is 7:1
بسمة محمود التونسي (2010)

Abstract One of an important application the filtration system, whether filtering water or air. Cement plants in Libya which are located in residential areas, agricultural, or near water sources, so dust problem are solved by using innovative solutions in environmental dust collection. Dust collection system has proved. Highly effective especially after improving the mechanical properties of the candidate to add enhanced materials, this was an obvious performance of the filter. Carbon fiber has a global and multi-market increases mechanical properties in various industries. The addition of simple ratios of fiber carbon to polypropylene increases the tensile strength significantly, working to withstand the difficult conditions faced by the filter of high pressure and sometimes moisture, and other conditions that earlier discussed in this thesis. Addition of Talc has significant effect to improve the arrangement of atoms leading to nucleation effect. By using CF reinforce to PP to produce the appropriate filter. Fiber reinforced plastic are very costly but the ability to sustain a load without excessive deformation or failure. Specified filters for use in nearly any industrial application. By applying this design can minimize the negative impact caused by the industry and reduce these emissions to about 99%+ efficiency on 0.3-0.4 micron particulate.
فاطمة عمر حديد (2015)

Abstract Natural gas has become an important source of energy in the world. Throughout the 19th century, natural gas was used almost exclusively as a source of light and its use remained localized because of lack of transport structures, making it difficult to transport large quantities of natural gas long distances. There was an important change in 1890 with the invention of leak-proof pipeline couplings, but transportation of natural gas to long distance customers did not become practical until the 1920s as a result of technological advances in pipelines. Moreover, it was only after World War II that the use of natural gas grew rapidly because of the development of pipeline networks and storage systems. Gas pipe lines are operated under steady state conditions. However, when transporting high temperature wet gas the gas getting cooled and heavy components condensate, Hence, pigs is usually are wanted to clean the pipe line to reduce pressure drop along the pipe In this study an existing pipeline was studied under steady and unsteady state. HYSYS and ProFES programs were utilized. Result show that gas temperature changes with time and distance. Results show that temperature and gas approach the ambient temperature at about 20 Km of pipe line length consequently, liquid phase volume fraction increase in first 20 Km of the pipe.
عدلي عمر احمد (2011)