هذه الدراسة تتركز على تحسين المعلومات بحل المشاكل الأستاتيكية الناتجة عن الكثبان الرملية في الامتياز (NC210) الذي يقع في حوض مرزق في الجنوب الغربي من ليبيا. وقد ثم اختيار عدد اثنين من الخطوط السيزمية وهما الخط (NC210-05-207) والخط (NC210-05-200) لإجراء هذه الدراسة. تم استخدم طريقتين لحساب التصحيحات الأستاتيكية وتم عرض النتائج. وبلغ طول هذين الخطين )26.5) كيلو متر وتم معالجتهما في شركة شمال أفريقيا للاستكشاف الجيوفيزيائ (NAGECO) باستخدام برنامج (ProMAX software, 2003) وكذلك برنامج (GeoTomo software).تم تطبيق معلومات الإنكسار السيزمي بطريقة (Delay Time Method) وكذلك طريقة حفر الآبار Uphole Method)) في هذه الحسابات. وأخيراً تم عرض أمثلة للمقاطع السيزمية باستخدام هاتين الطريقتين ومناقشة النتائج المتحصل عليها. Abstract This study deals with static problems on seismic reflection profiles over sand dunes in concession NC210 in Murzuq Basin southwestern Libya. Two methods of computing field statics have been implemented and the results are presented. Two seismic lines of 26.5 km total length that crossed over sand dunes were processed in North Africa Geophysical Exploration Company (NAGEC) using proMAX software package for seismic data processing and GeoTomo software for inversion static correction softwares for each set of field statics. The refraction field statics are estimated by picking the first break from seismic reflection records using delay time method. The second method of field statics that has been used in this study is the uphole method or conventional method. Examples of brute stack sections of both seismic lines have been presented with two different field statics.range from fair (10%-20%) and lower Nubian (6%-15%). The permeability values range from (2.40 md) to (91.1md), water saturation varies across the reservoir due to the location with respect to the boundaries of the field, averaging 33%. Nubian formation the cement is quartz overgrowth and pore filling cements including anhydrite, chlorite and clays (kaolinite, chlorite and illite/smectite). The oil contact (owc) 3v-59 is defined to be at sub sea depth of 110110 ft. and 97-II NC (OWC) was observed in the reservoir section. The Net Pay is 235 ft at 6% porosity cut off for Q2well, and Q1well the net pay123ft, at 6% porosity, 3v3 the Net pay is 273.5 ft, MOS is 5.64 ft, and residual oil column heigh 7.133 ft, and 3v4 well the net pay equal 324.0 ft, at 6% porosity, Net pay is 273.5 ft, MOS is 3.05 ft, and residual oil column high 2.701ft, and oil saturation 54.66%, Difference in formation water salinity between wells where 3v-59E has salinity of 160,000ppm and OO82 is 215,000 pm. This difference in salinity affects the formation resistivity actor, consequently, the cementation factor because the formation factor depends on many parameters such as porosity, pore size and structure; salinity of connate water and irreducible water saturation.
عبد المجيد عمر أبو محلولة (2013)

يقصد بهذه الدراسة تعريف وتقصي ثلاثة مفاهيم للاشتقاق في جبر حقيقي ثلاثي الأبعاد. يمكن استعمال فعل نصف الزمرة الضربية للمصفوفات الحقيقية على جبر، لتعريف مشتقين هما مصفوفتان يرمز لهما بالرمزين . [-derivative و F- derivative] ويعتبر الأخير الأقوى وبديل للمفهوم الثالث للمشتق كعنصر في الجبر. وقد قدمت طرق إيجاد كل مشتق من بديله، وتم إعطاء عدة نتائج وتوضيحات تظهر الجوانب العلمية والحسابية. Abstract By defining an action of the unital multiplicative semi group of matrices on a three dimensional real algebra, the concepts of F- derivative and -derivative are introduced for a function with domain and range in .In each concept the derivative is a matrix; however a third concept of derivative is defined as an element of the algebra. Several results, relations, illustrations are given.
فاطمة بشير ارحومة (2014)

Abstract The Sirt Basin is one of the youngest sedimentary basins in Libya and covers an area of approximately 600.000 km² in north central Libya. It is located on the northern margin of the African plate, with approximate coordinates 14°00`- 20°00`E and 28°00`-31°00`N. The Late Jurassic-Early Cretaceous as Sarir Sandstone in the Sirt Basin evolved as a consequence of the interplay between global eustasy and regional tectonics. As Sarir Sandstone of the eastern Sirt Basin is composed mainly of sandstones and shales resting unconformably on a basement complex of igneous and metamorphic rocks. It is unconformably overlain by the Upper Cretaceous sediments of Maragh, Lidam and Etel formations. It has been subdivided into three members. The upper member consists mainly of sandstones with intercalations of siltstones and shales of variable thickness. The middle member consists of shale and silty shale. The basal part of the formation, which rests directly on the crystalline basement represents the lower member. It is comprised of sandstone with subordinate intercalations of siltstones and shale. Two main facies have been recognized on the basis of lithological features and types of stratifications: which consist mainly of shale and intercalation of silt and sand. The Middle Shale Member consists mainly of shallow lake deposits, containing black shale facies. Continental Fluvial Deposits represent most of the cored interval and it belongs to the Upper as Sarir Sandstone. These facies have been subdivided into braided and meandering lithofacies: The braided depositional system, has been recognized in three different intervals of the studied cores; classified as subfacies (1), subfacies (2) and subfacies (3). The meandering depositional system, represents three sub-environments including point bars, abandoned channels and over-bank deposits. The reservoir characteristics of these sediments are studied on the basis of porosity, permeability and reservoir zonation. The reservoir quality of As Sarir Formation is largely controlled by primary sedimentary features associations, which were shaped by the depositional environments. Meandering Lithofacies are formed from continuous sand successions and show good porosities, up to 18.51%, and permeabilities up to 125.5mD. The Braided Lithofacies also show good reservoir quality, but the effective porosity and permeability are lower, because of associated shales. The most important diagenetic features responsible for a reduction in reservoir quality are those resulting from compaction, cementation, and the diagenesis of clay minerals.
صلاح الدين محمد الوحيشي (2014)